Applications: start with your process.
Find your application, see which grades the partner group makes for it, then compare their typical values. Images on this page are illustrative.
Building and cold chain
Insulation panels and cold stores
PUR and PIR systems for discontinuous (press) lines and continuous (double-belt) lines, and a PUR system for air-handling-unit panels.
Fire performance in the UK is a Euroclass to BS EN 13501-1 on the finished, tested panel, not a property of the chemical system. We'll share what test data exists for a grade, and say so when it doesn't.
Grades to look at
- Discontinuous: Polynol DP2622/PUR, DP2124/PIR, FC 2320/PUR, FC 2360/PIR
- Continuous: Polynol CP 8025/PUR, CP 8026/PIR
- AHU panels: Polynol 2226/PUR
Building
Spray insulation
PUR and PIR spray systems for insulation contractors and spray-foam system houses.
In the UK, spray foam used in buildings is usually sold with third-party certification, and use in some locations (for example pitched roofs) gets extra scrutiny from surveyors and lenders. Ask us what documentation exists for a grade before you specify it.
Grades to look at
- Polynol FC 3545/PUR, FC 3544/PUR
- Polynol FC 4245/PIR, FC 4244/PIR
Building services and district energy
Pipe insulation and pipe supports
Systems for pre-insulated pipe production, plus a high-density PUR system for load-bearing pipe supports.
Grades to look at
- Pipe line: Polynol PL 6300/PUR, PL 6500/PIR, PL 5006/PUR, PL 5060/PIR, PL 6400/PUR, PL 6040/PIR
- Pipe support: Polynol PS 4210/PUR
Appliances
Appliances, water heaters and thermoware
Systems for domestic and commercial refrigeration cabinets, insulated water heaters (electric and solar) and thermoware such as cool boxes and flasks.
Appliance foam is usually injected into a closed cabinet, so flow, density distribution and demould time matter as much as insulation. Tell us your cabinet and machine.
Grades to look at
- Domestic refrigerators: Polynol CP-2025 R, FC-2027 R, FA-2028 R
- Commercial refrigerators: Polynol CP-2032 R, FC-2033 R, FA-2034 R
- Water heaters: Polynol GH 2224/PUR
- Thermoware: Polynol FC-2021/PUR, FA-2022/PUR
Furniture, bedding and transport
Moulded foam and seating
High-resilience (HR) moulded foam systems for automotive seats, furniture, two-wheeler seats and mattresses.
Grades to look at
- Polyflex ACF-790 (automotive seats), ACF-791 (furniture)
- Polyflex ACF-793 (motorcycle and bicycle seats), ACF-794 (mattresses)
- Polyether polyols for slabstock and moulded foam
Automotive, furniture and footwear
Footwear and integral skin
Integral skin foam (ISF) systems for chair handles, armrests, steering wheels and automotive floor mats. The partner group's Polyfoot range covers footwear components such as polyether-based footbeds.
Grades to look at
- Polyflex ISF-763, ISF-764, ISF-765, ISF-793
- Polyfoot footwear systems (grades on request)
CASE
Adhesives, coatings, sealants and elastomers
The partner group lists PU adhesives, PU coatings, prepolymers (Polynate) and polyester polyols for CASE uses. We haven't published grade data for these yet, because we only list figures we can back with a document. Tell us your application and we'll come back with what's available and its TDS.
Source: polyteksynergy.com product list.
Ask about CASE gradesTry one grade on your own line.
Tell us your process and volumes. We'll match a grade, send the TDS and SDS, and confirm sample timing in writing.